Tank material is made by food grade stainless steel, for transport milk and other liquid food
Usually 4-5cbm tank capacity for one compartment, with independent discharging system，can load different liquid foods at the same time
Insulation function: within 24 hours medium temperature elevating ≤1 ℃
equipped with PIC cleaning system, easy for the inner tank washing
304-2B inner tank material is food grade stainless steel 4mm thick, the insulation layer of polyurethane foam insulation 8CM, Outer tank material 304 stainless steel 2mm。
PIC cleaning system is installed inside the tank for each compartment
Foton 5cbm LHD 4*2 63hp milk tank truck(with pump)
1). The truck is special used for transporting milk
2). The inner tank material is food grade stainless steel, it’s special used for transporting milk or other liquid food.
3). It can be made several warehouses inside the tank, each of them can unload separately for different liquid food transportation.
4). Heat insulation: temperature change LE1°C within 24 hours
5). With PIC clear system, it’s easy for clearing the inner tank
6). Standard spare parts for easy maintenance.
Specification of Foton 5cbm LHD 4*2 63hp milk tank truck
Foton 5cbm LHD 4*2 milk tank truck
4*2, Left Hand Drive
Vehicle Main Dimensions
Dimensions(L x W x H)mm
Wheel base (mm)
Max. driving speed(km/h)
Maximum output power
4 cylinders, inline, direct injection, naturally aspirated
Maximum torque speed(RPM)
Minimum fuel consumption at full load
Engine net weight
Noise outside one meter
Bore diameter x stroke(mm)
5 Forwarder+1 Reverse
power steering, hydraulic steering with power assistance
6.50-16 , 6+1 Spare tire
304-2B Stainless steel
Inner layer :3mm 304-2B stainless steel
Middle layer(thermal insulation): 80mm polyurethane foam insulation
Outside layer:2 mm 201 stainless steel
1.The tank is made up of three layers:outside layer(for physical protection),
middle layer(thermal insulation),inner layer tank(for milk filling).
2.The thickness of thermal insulation layer is 80mm Polyurethane foam, the
function of thermal insulation: medium temperature change ≤1°C during 24-
3.The inner tank material is high quality food grade stainless steel 304-2B,
and it has been polished.
4. Equipped with PIC self-cleaning devices.
5. The tank divided into several compartments to make sure the inside can be clear
thoroughly,also can contain different medium.
6. Stainless steel valves,pipes.
1. 20 independents workshops.
2. Established from 2004.
3. 300 senior engineers and technicians. About 2000 to 3000 workers.
4. 380kinds of trucks and semi-trailers.
5. Turnover 2million trucks and semi-trailers annually.
6. 1000 sets of equipments, 25 assemble lines.